Corrugated carton production engineering

As an indispensable part of modern logistics, packaging carton bears the important responsibility of packaging, protecting products and aesthetics. The physical performance index of packaging carton becomes the basis for its quality evaluation. For example: aviation custom wooden box, customized personalized cartons, printed green carton, custom logistics cartons, etc. Stable working environment conditions ensure the accuracy and reliability of test data, and many senior engineers engaged in carton testing for many years, testing and analysis of packaging, testing and analysis of packaging, providing fairness to package suppliers and package users Scientific test data.

Corrugated cardboard is made by bonding corrugated paper which is processed into corrugated corrugated paper from paper, paper and core paper. According to the demand of commodity packaging, corrugated board can be processed into single-faced corrugated board, three-layer corrugated board, five-layer, seven-layer, eleven-layer corrugated board.

Corrugated carton production and crafts

1, Sticky / nail strip: also called the lap joint, usually called the mouth. In order to form a corrugated box and form a part on one side of the box, the stick/nail strip is the same height as the corrugated box, and the length is generally about 30-40 mm.

2, Shake cover: also called E cover, divided into outer shake cover and inner shake cover. Generally, the long side flap is placed on the outside for the outer flap, and is folded when folded; the wide side flap is placed inside to be the inner flap, and the fold is not closed. Corrugated boxes can be divided into several types according to the different lengths of the inner and outer flaps.

3, Box mai: printed on the corrugated box description of the installed product name, quantity and corrugated box size and other patterns and text. The contents of the box are determined by the customer. According to the position of the printing, it can be divided into the front side and the side side. The front side is printed in the long direction of the box, and the side side is printed in the width direction of the box; if the long side of the box is printed on the two sides, the contents are different. In order to distinguish, the mai is divided into strips and mai; the mai is the long direction of the nail, and the other side is the mai.

4. Slotting: the opening between the flaps, the height is the same as the height of the flap.

5, Hand-pull: also called hand buckle. Generally on the side of corrugated box, the shape is often two round rectangle, the upper straight beer is half worn, the rest are all worn; the hand pull should be determined according to customer requirements size and position, generally can not beer pattern.

6. High and low line: The high and low line of corrugated box means that the pressure line of the inner and outer flaps of the corrugated box is not on the same line; the inner flap pressure line is lower than the outer flap pressure line by about one corrugated paper.

7. Post-press printing: A production process that allows printed products to achieve the desired shape and performance.

8, Die-cut: diecutting with a steel blade into a mold (or carved into a mold with steel), frame. A process of rolling a sheet of paper into a shape on a die-cutting machine.

9. Indentation: Crease/Score uses steel wire to emboss marks on the paper or leave grooves for bending. Usually done by die cutting machine.

10, The combination of methods: Joint commonly used bonding methods are glue (glue), self-lock (selflock), tape sealing (tape), staple (Staple) and so on.